Biological activity of Burkholderia (Pseudomonas) cepacia lipopolysaccharide

Abstract Burkholderia cepacia has emerged as an important multiresistant pathogen in cystic fibrosis (CF), associated in 20% of colonised patients with a rapid and fatal decline in lung function. Although knowledge of B. cepacia epidemiology has improved, the mechanisms involved in pathogenesis remain obscure. In this study, B. cepacia lipopolysaccharide (LPS) was assessed for endotoxic potential and the capacity to induce tumour necrosis factor (TNF). LPS preparations from clinical and environmental isolates of B. cepacia and from the closely related species Burkholderia gladioli exhibited a higher endotoxic activity and more pronounced cytokine response in vitro compared to preparations from the major CF pathogen Pseudomonas aeruginosa . This study may help to explain the vicious host immune response observed during pulmonary exacerbations in CF patients colonised by B. cepacia and lead to therapeutic advances in clinical management.     

Studies on the protolytic reactions coupled with water cleavage in photosystem II membrane fragments from spinach

The protolytic reactions of PSII membrane fragments were analyzed by measurements of absorption changes of the water soluble indicator dye bromocresol purple induced by a train of 10 s flashes in dark-adapted samples. It was found that: a) in the first flash a rapid H⁺-release takes place followed by a slower H⁺-uptake. The deprotonation is insensitive to DCMU but is completely eliminated by linolenic acid treatment of the samples; b) the extent of the H⁺-uptake in the first flash depends on the redox potential of the suspension. In this time domain no H⁺-uptake is observed in the subsequent flashes; c) the extent of the H⁺-release as a function of the flash number in the sequence exhibits a characteristic oscillation pattern. Multiphasic release kinetics are observed. The oscillation pattern can be satisfactorily described by a 1, 0, 1, 2 stoichiometry for the redox transitions S_i S_i+1 (i=0, 1, 2, 3) in the water oxidizing enzyme system Y. The H⁺-uptake after the first flash is assumed to be a consequence of the very fast reduction of oxidized Q₄₀₀(Fe³⁺) formed due to dark incubation with K₃[Fe(CN)₆]. The possible participation of component Z in the deprotonation reactions at the PSII donor side is discussed.Abbreviations A protonizable group at the PSII acceptor side - BCP Bromocresol Purple - DCMU 3-(3,4-dichlorophenyl)-1,1-dimethylurea - FWHM Full Width at Half Maximum - Q_A, Q_B primary and secondary plastoquinone at PSII acceptor side - Q₄₀₀ redox group at PSII-acceptor side (high spin Fe²⁺) - P680 Photoactive chlorophyll of PSII reaction center - S_i redox states of the catalytic site of water oxidation - Z redox component connecting the catalytic site of water oxidation with the reaction center     

Control of cloned gene expression by promoter inversion in vivo: construction of the heat-pulse-activated att-nutL-p-att-N module

We have constructed a prototype of gene-expression plasmids with three novel properties: its "OFF phase" is absolute in all common hosts because the expression promoter is facing away from the studied gene and is blocked by a strong terminator; the "ON phase" is attained by the rapid and efficient inversion of the promoter; only a short heat pulse or exposure to other inducing agents is required to initiate this two-stage process. In the first stage, synthesis of the phage lambda Int protein is induced by the transient derepression of the properly engineered lambda xis- cIts857 prophage. In the immediately following second stage, Int causes inversion of a promoter cloned between the inverted ----P'OP phage att site and the normally oriented ----delta PO delta P' pseudo-bacterial att site. The inverted promoter can now control the expression of the studied gene and also of the lambda N gene cloned in tandem. The N product, in conjunction with the nutL site placed downstream of the promoter, permits efficient antitermination of any terminators present in the att sites, in the plasmid or in the cloned DNA, making this system efficient and of practical value. Employing the promoter-inverting plasmid, it was possible to obtain rapid onset and a high level of galactokinase synthesis from the cloned galK gene. Only a transient, 10-min induction at 42 degrees C was employed, permitting protein synthesis at 30 degrees C, which might be of importance for thermosensitive products. Furthermore, the entire promoter-inversion module can be transferred to any plasmid as a 1.3-kb AvaI-ClaI fragment (see Fig. 1).(ABSTRACT TRUNCATED AT 250 WORDS)     

Genomic complexity and plasticity of Burkholderia cepacia

Abstract Burkholderia cepacia has attracted attention because of its extraordinary degradative abilities and its potential as a pathogen for plants and for humans. This bacterium was formerly considered to belong to the genus Pseudomonas in the γ-subclass of the Proteobacteria , but recently has been assigned to the β-subclass based on rrn gene sequence analyses and other key phenotypic characteristics. The B. cepacia genome is comprised of multiple chromosomes and is rich in insertion sequences. These two features may have played a key role in the evolution of novel degradative functions and the unusual adaptability of this bacterium.     

湿度和温度对酰化紫膜LB膜M衰减的影响

用闪光动力学光谱仪测量了酰化紫膜ＬＢ膜中Ｍ衰减速率的变化。酰化紫膜ＬＢ膜的衰减无论是悬浮液状态,还是ＬＢ膜中,均比未修饰的要慢。在温度为２０℃时,酰化紫膜ＬＢ随着相对湿度的增加,Ｍ衰减加快。在相对湿度较低时（ＲＨ３４—７５％）,变化较平缓,即Ｍ的衰减加快不明显;在相对湿度较高时（ＲＨ８４—９５％）,Ｍ衰减明显加快。温度的变化则随相对湿度不同而不同。相对湿度较低时,随着温度的升高,Ｍ衰减加快;相对湿度较高时,Ｍ衰减反而减慢。酰化紫膜悬浮液的Ｍ衰减随着温度的升高而明显加快．这说明酰化紫膜ＬＢ膜中ＢＲ水合程度可能是直接影响Ｍ衰减的因素之一。     

分子识别诱导的蛋白质和核酸多层膜的有序组装

通过生物大分子之间的特异性结合,采用表面等离激元共振技术监测,报导了支撑于固体表面脂单层膜上进行的亲和素、生物素标记的质粒ＤＮＡ、以及从系统性红斑狼疮患者血清中获得的抗ＤＮＡ抗体多层膜的有序组装。这种生物大分子的组装技术可以用于生物传感器以检测特定的抗原抗体。     

Transport of bacterial inoculants through intact cores of two different soils as affected by water percolation and the presence of wheat plants

Abstract Water flow-innduced transport of Burkholderia cepacia strain P2 and Pseudomonas fluorescens strain R2f cells through intact cores of loamy sand and silt loam field soils was measured for two percolation regimes, 0.9 and 4.4 mm h⁻¹, applied daily during 1 hour. For each strain, transport was generally similar between the two water regimes. Translocation of B. cepacia , with 4.4 mm h⁻¹, did occur initially in both soils. In the loamy sand soil, no change in the bacterial distribution occurred during the experiment (51 days). In the silt loam, B. cepacia cell numbers in the lower soil layers were significantly reduced, to levels at or below the limit of detection. Transport of P. fluorescens in both soils also occurred initially and was comparable to that of B. cepacia . Later in the experiment, P. fluorescens was not detectable in the lower soil layers of the loamy sand cores, due to a large decrease in surviving cell numbers. In the silt loam, the inoculant cell distribution did not change with time. Pre-incubation of the inoculated cores before starting percolation reduced B. cepacia inoculant transport in the loamy sand soil measured after 5 days, but not that determined after 54 days. Delayed percolation in the silt loam soil affected bacterial transport only after 54 days. The presence of growing wheat plants overall enhanced bacterial translocation as compared to that in unplanted soil cores, but only with percolating water. Percolation water from silt loam cores appeared the day after the onset of percolation and often contained inoculant bacteria. With loamy sand, percolation water appeared only 5 days after the start of percolation, and no inoculant bacteria were found. The results presented aid in predicting the fate of genetically manipulated bacteria in a field experiment.     

在无溶剂系统中固定化脂肪酶合成聚乙二醇400月桂酸酯

在无溶荆反应系统中,研究了固定化假丝酵母(Candida sp)-1619脂肪酶催化合成聚乙二醇400(PEG400)月桂酸酯的酯化条件。在反应过程中不断脱水和使月桂酸的量高于化学计量值的方法,使酯化率明显提高。分批补加PEG₄₀₀使产量进一步增加。在5．0mmol月桂酸．2．5mmolPEG400,20mg同定化脂肪酶(200u),O．2ml水组成的反应体系中,40℃,锥形瓶敞口振荡反应48h。醑化率达91％;在负压条件下反应．酯化率达98．9％;反应体系中月桂酸的董增加到6．0mmol时,PEG₄₀₀完全被酯化。用己烷提取产物的收率为95％．通过薄层色谱鉴定酯化产物为双酯。     

The use of a partition locus to increase stability of tryptophan-operon-bearing plasmids in Escherichia coli

The stability of different derivatives of plasmid vectors pBR322 and pACYC184 carrying the tryptophan operon of Escherichia coli was monitored in various media. It was found that in the absence of any special selective pressure, all plasmids were lost from the culture. The stability varied depending both on the orientation of the inserted tryptophan fragment and the growth media used. The pBR322::trp+ plasmids were lost at an average frequency of 0.3 to 0.8% per cell generation, while the pACYC184::trp+ plasmid was lost at a rate higher than 5%. In all cases the whole plasmid was lost at a rate higher than 5%. In all cases the whole plasmid was lost, indicating a high stability of the plasmid::cloned DNA as such. To increase the stability of the cloning vectors, the partition locus of plasmid pSC101 was added to both the pBR322::trp+ and pACYC184::trp+ plasmids. The addition of this gene increased the replicon stability at least 3- to 10-fold, with the pBR322::trp+-par+ plasmids being the most stable. Also in this case, the stability was dependent on the plasmid type and on the growth medium. In no case was there a discoordinate loss of the antibiotic-resistance and tryptophan genes from the vectors.